KS-F18 Serial Specification


Product Performance

Model

KS-F18

Maximum speed

the idling speed is 120+KM/h (factory setting is 18km/h first-level alarm, 19km/second-level alarm, 20km/third-level alarm and rocker)

Cruise distance

About 150km (60KG, 25-30℃ ambient temperature, no wind, 20km/h, flat road

Maximum climbing angle

About 45°​ (60KG, 25-30℃ ambient temperature)

Battery information





Battery cell: Samsung 50S 144 cells

Rated voltage: 133.2V

Maximum charging voltage: 151.2V

Rated capacity: 2664Wh

Battery protection board: With intelligent BMS battery management system such as balancing, overcharge, overcurrent, short circuit protection, abnormal analysis, etc.

Applicable temperature

-10℃/+45℃

Maximum load

140Kg

Battery Protection level

IPX6

Charger voltage

Input AC 100-240 V, output DC 151.2V, 10A

Charging time


10A charging: 2664Wh about 2-3h

20A charging: 2664Wh about 1-2h

Motor rated output power

5000W

Motor maximum output power

9000W

OTA

The mainboard, display board, and battery BMS all support Bluetooth OTA firmware updates. The new OTA architecture makes the upgrade faster and more stable.


Dimension & Weight

Vehicle size

560(L)*290(W)*750(H)mm

Packaging size

625(L)*319(W)*832(H)mm

Suspension specifications

Multifunctional suspension optional, with adjustable rebound compression resistance, adjustable spring preload

Suspension travel

Frame suspension travel 100mm

Height and angle of pedal from the ground

245-145 (mm), standard ~8° inclination

Tyre specifications

2.75-14

Net weight of vehicle

About 41Kg

Body interface

Dual GX20-5-pin aviation head charging port; power switch


Protective Measures

Lift-up shutdown protection

Double-click the power switch to stop, and the balance will be restored automatically after the machine is straightened.

Tilt protection

Both sides are 45° (if the angle exceeds 45°, the motor will stop running, and this angle can be adjusted on the APP). After the machine is straightened, the power will be restored without restarting.

Speed limit protection

Overspeed buzzer alarm or voice broadcast + pedal rocker prompt

Low battery protection

Power remaining about 30% to start speed limit protection , linearly decreases according to the alarm setting value. When the remaining power is 5%, the buzzer beeps. When the power is 0%, the front end of the pedal begins to lift and gradually slows down until it stops.

High temperature protection

85℃ high temperature seesaw for the mainboard, 175℃ high temperature seesaw for the motor, and 60℃ high temperature seesaw for the battery.

Mainboard waterproof protection

The motherboard is modularly designed and independently waterproof. At the same time, the U-shaped groove between the motherboard seat and the upper cover is connected with a silicone sealing ring to enhance the waterproof performance and provide a safe waterproof protection for the motherboard seat.

Battery waterproof protection

Independent battery and multiple waterproof designs

Pedal anti-slip protection

The raised small cylinders are evenly arranged on the pedals according to the force position of the human foot. Compared with the traditional sand paste, it is more effective in preventing slipping and greatly improves the safety performance and riding experience.

Vehicle reverse parking device

The parking bracket is designed according to the whole vehicle, making parking more convenient.The parking bracket is designed according to the whole vehicle, making parking more convenient.


Message

Power on/off

Short press the power button to turn on, long press the power button to turn off

Battery level

The LED dot matrix screen displays the power level when the device is turned on and not riding

Speed display

The LED dot matrix screen can display speed, voltage, and current in riding mode, which can be adjusted through the APP


Hardware Configuration

Mainboard

Brand-new motherboard architecture, the driver board is designed separately on the aluminum substrate, which has better heat dissipation. 30 brand-new Toll packaged low-resistance MOS provide good power supply for high-power motors. The modular design of the control board and display board provides good support for the whole system.

Data Bluetooth system

Adopting 5.1 Bluetooth module, it has stronger compatibility and more stable data transmission.

Lighting, switch



Integrated modular lighting and switch design, more convenient maintenance;

1. Lighting: 30W high-power integrated dual-color (white light + yellow light) lighting + auxiliary 12W lighting, automatically adjust the brightness according to the speed, automatically turn on and off the lighting system at night according to the set time, and can adjust the angle separately to provide all-round lighting at night

2. Switch: Silicone waterproof switch design, integrated power on/off, shutdown switch, lighting switch design

Charging port

Dual charging port design, a single charging port supports 10A high current, the whole vehicle supports 20A fast charging

Music system


1. The system comes with Bluetooth music, which can be connected to the vehicle through the mobile phone to play music. Bluetooth uses 5.3 technology to provide better sound quality for playing music;

2. Adopts independent stereo sound design, configured with 20W woofer*2 + 15W tweeter*2, sound frequency division design, making the bass more powerful and the treble more transparent;

Charging

Provide two charging ports, you can insert two chargers to quickly charge the device

Colorful lights

The tail lights are integrated into the body of the euc, the music spectrum is jumping, and various lighting effects such as braking and steering make the whole euc even cooler.

Taillight

Tail RGB light design, red brake light, turn and other lighting effects

Display

Integrates power, speed, fault code, spectrum display and other information into one 16*16 dot matrix display (Set the display content in the APP)

Temperature control system

Real-time monitoring of motherboard, motor and battery temperature, providing good safety protection for users to ride

Handle

The new integrated design of the front and rear double handles, made of carbon fiber, has a better texture and strength, making it more convenient to carry the car, stable and reliable

Trolley

Independent center-mounted three-section U-shaped pull rod design, more portable

Motor

The newly developed high-power 5000W hollow shaft motor provides a strong acceleration feeling for riders

Battery

Adopt Samsung 50S 21700 5000mA battery cell, the whole vehicle is designed with four independent batteries, the battery protection board adopts the new BMS battery management system, real-time monitoring of battery safety, magnesium alloy battery box integrated design, more reasonable design, safer to use

Suspension system

Adopt spring + air multifunctional combination suspension, independent damping and spring preload adjustable knob, creating a new riding experience for users


Packing Material

Standard accessories

Charger*1, user manual*1, certificate*1, Pump*1