KS-S18 Specifications | ||
Product Performance | ||
Model | KS-S18 | |
Max. speed | Full speed unlocked after 10km. Max speed of 50km/h.(Factory alarm settings: 18km/h first level alarm, 19km/h second level alarm, 20km/h third level alarm and warp plate). | |
Mileage | Around100km ( Condition: load:60KG,temperature:25-30℃,no wind，20km/h,flat road) | |
Max. Gradeability | Around 35° | |
Battery information | Rated Voltage： DC 72V Top Charing Voltage： DC 84V Rated Capacity：1110Wh Battery Protection board: Equipped with BMS battery management system, such as balance, overcharge, overcurrent, short-circuit protection, and abnormal analysis. | |
Temperature | -10℃/+60℃ | |
Max. loading | 120Kg | |
Charing voltage | Input:AC 80~240 V Output:DC 84V、2.5A | |
Charing time | Around 6h | |
Rated output power | 2200W | |
Max. output power | 5000W | |
Dimension & Weight | ||
Dimension | 530mm(L)*200mm(W)*557mm(H) | |
Package | 630mm(L)*300mm(W)*715mm(H) | |
Suspension | DNM AOY 36RC , Air suspension, mounting hole distance 200mm, stroke 57mm | |
Suspension travel | Frame damping stroke 100mm, spring stroke 57mm, lever ratio curve | |
Pedal Altitude (from ground) | 210-110（mm） | |
Tire Size | 18*3.0 | |
Net weight | ~25KG | |
EUC Port | Charging port; Power switch; Light sensing port; USB | |
Display | Integrated turn lights and taillight lights, and display battery level when no riding state is turned on. | |
Protective Measures | ||
Lift sensor switch | The Hall switch detects the user's maneuvering more sensitively and accurately | |
Roll protection | The Angle of protection is 45 degrees (if it exceeds 45 degrees, the motor will stop running). After righting, the power will be restored without restarting. | |
Speed limit protection | Overspeed buzzer alarm or speech broadcast + pedal tilt back | |
Low power protection | When the remaining power is about 30%, the speed limit protection will be started and linearly decrease according to the alarm setting value. When the remaining power is 5%, the buzzer will give an alarm. When the power is 0%, the front end of the pedal will start to lift and gradually slow down until it stops. | |
High temperature protection | The euc will tilt back when the motherboard at 80℃ ,and also titl back when the motor is at 120 ℃ | |
Message | ||
Power on/off | Short press the power button to turn on EUC. Long press the power button, to drop a sound and power off EUC. | |
Battery level | The LED dot matrix display displays the power when the device is powered on and no riding | |
Hardware | ||
Motherboard | The whole board adopts 4-layer board architecture design, which makes the whole machine work more stable. 12 TO-247 large package MOS for 2200W motor TO provide a strong guarantee, MOS tube directly attached to the aluminum body, can quickly heat | |
Bluetooth | 4.0 Bluetooth module, more compatible, more stable data transmission. | |
USB outtput | QC 3.0 fast charger | |
Lighting | 5W*2 high beam +4W*2 low light (double of 16X) to provide good lighting at night. | |
Temperature control system | Motherboard, motor temperature real-time monitoring, to provide good security for users riding | |
Handle | The telescopic pull rod, which integrates the aluminum tube of the body, is more portable to use, whether it is a lift or a trolley. | |
Motor | Using a high-power 2200W motor, it provides a strong torque of up to 140N.m, providing a strong sense of acceleration for the rider. | |
Suspension system | The unique X-link damping structure uses the unique lever structure of racing grade to achieve strong support and soft linear damping experience | |
Package | ||
Standard parts | 1* charger, 1* manual, 1* pump ,1*Certificate of qualification | |