KS-S22PRO Specifications | ||
Product Performance | ||
Model | KS-S22PRO | |
Max. speed | It can be decoded and adjusted to70KM/h, after riding for 10KM.The idling speed is 105KM/h (Factory alarm settings: 18km/h first level alarm, 19km/h second level alarm, 20km/h third level alarm and tilt back). | |
Mileage | around 200km ( Condition: load:60KG,temperature:25-30℃,no wind，20km/h,flat road) | |
Max. Gradeability | Around 40°（ 84%）( Condition: load:60KG,temperature:25-30℃) | |
Battery information | Cell：Samsung 50S Lithum battery Rated Voltage： DC 111V Top Charing Voltage： DC 126V Rated Capacity：2220Wh Battery Protection board: Equipped with intelligent BMS battery management system, such as balance, overcharge, overcurrent, short-circuit protection, and abnormal analysis. | |
Temperature | -10℃/+45℃ | |
Max. loading | 120Kg | |
Charing voltage | Input:AC 100-240 V ，Output:DC 126V、5A | |
Charing time | Around 4-5h | |
Rated output power | 4000W | |
Max. output power | 8500W | |
Dimension & Weight | ||
Dimension | 582mm(L）* 330mm（W）*747mm（H） | |
Package | 680mm(L)*330mm(W)*970mm(H) | |
Suspension | DNM RCP 2S,750lb,Spring shock absorber, mounting hole distance 240±2mm, stroke 110mm | |
Suspension travel | Frame damping stroke 130mm, spring stroke 75mm | |
Pedal Altitude (from ground) | 238-128（mm），Standard Angle of 6° | |
Tire Size | 2.75-14, 20inch | |
Net weight | Around 35KG | |
EUC Port | Dual 16-6 charging port; Power switch; Light sensor | |
Tailight | Integrated turn lights and taillight lights. | |
Protective Measures | ||
Lift sensor switch | The Hall switch detects the user's maneuvering more sensitively and accurately | |
Roll protection | The Angle of protection is 45 degrees (if it exceeds 45 degrees, the motor will stop running). After righting, the power will be restored without restarting. | |
Speed limit protection | Overspeed buzzer alarm or speech broadcast + pedal tilt back | |
Low power protection | When the remaining power is about 30%, the speed limit protection will be started and linearly decrease according to the alarm setting value. When the remaining power is 5%, the buzzer will give an alarm. When the power is 0%, the front end of the pedal will start to lift and gradually slow down until it stops. | |
High temperature protection | The euc will tilt back when the motherboard at 80℃ ,and also titl back when the motor is at 120 ℃ | |
Motherboard waterproof protection | The U-shaped slot and silicone sealing ring are connected between the main board seat and the upper cover plate, which greatly enhances the waterproof performance and provides a safe waterproof guarantee for the main board seat | |
Anti-slip protection | The pedals are evenly arranged with raised small columns in accordance with the stress position of the sole of the feet, which is more effective than the traditional abrasive paper to protect and prevent slip, and greatly improves the safety performance and riding experience. | |
Upside down stop device | According to the design of the euc, the foot support device is added, which can open and close freely, convenient operation, and no longer worry about falling when parking. | |
Left and right leg guard protection | The pads adopts ergonomic design and soft foam self - crust forming, moderate hardness, increase the acceleration and deceleration experience, better protect the body. | |
Message | ||
Power on/off | Short press the power button to turn on EUC. Long press the power button, to drop a sound and power off EUC. | |
Battery level | The LED dot matrix display displays the power when the device is powered on and no riding | |
Speed display | LED dot matrix display speed in riding mode | |
Hardware Configuration | ||
Motherboard | The whole board adopts 4-layer board architecture design, which makes the whole euc more stable. The 12pcs TO-247 large package MOS provides a strong guarantee for 4000W motor. The MOS tube is directly attached TO the magnesium alloy main board seat, and 16 heat dissipation channels are added at the bottom of the magnesium alloy main board seat, which can dissipate heat quickly and provide a strong guarantee for fast and stable operation. | |
Bluetooth | 5.0 Bluetooth module, more compatible and more stable data transmission. | |
Headlights | A group of left and right, a total of 5W*8 illumination lights, automatically adjust the brightness according to the speed (twice the S18), the two lights can be adjusted separately to provide good lighting at night | |
Tailight | Integrated turn lights and taillight lights. | |
Display | Power, speed, and other information as one dot matrix display | |
Temperature control system | Motherboard, motor temperature real-time monitoring, to provide good security for users riding | |
Handle | The new front and rear double handle design makes the lifting more convenient, stable and reliable | |
Trolley | Independent pull rod design for more portable use | |
Motor | The high power 4000W hollow shaft motor provides a strong sense of acceleration for riders | |
Battery | LG21700 5000mA battery cell, vehicle distribution design of two independent batteries, battery protection board using a new BMS battery management system, real-time monitoring of cell safety, aluminum body and battery box integrated design, more reasonable design, safer use. | |
Suspension system | The unique X-link damping structure uses the unique lever structure of racing grade to achieve strong support and soft linear damping experience | |
Seat cushion | Adds a comfortable seat cushion for skilled and long-distance riders, ergonomically designed to ease the pain of standing up | |
Pad | The vehicle adopts an adjustable design, and the position is customized according to the individual's riding requirements | |
Package | ||
Standard parts | 1* charger, 1* manual, 1*seat cushion ,1*Certificate of qualification | |